Du soufre contre le phytopte du poirier – Efficacité confirmée

Les essais effectués cette année par le FiBL et par Agroscope Changins et Wädenswil confirment la bonne efficacité du soufre contre le phytopte du poirier. Dans les vergers atteints, il est recommandé de faire un traitement au soufre (à 2 pour-cent) après la récolte des poires

Schwefel gegen Birnenpockenmilbe: Wirkung bestätigt

Diesjährige Versuche des FiBL und der Agroscope Changins und Wädenswil bestätigen die gute Wirkung von Schwefelbehandlungen gegen die Birnenpockenmilbe. In befallenen Anlagen ist die Behandlung mit Schwefel (2 Prozent) nach der Birnenernte empfohlen

Birnenpockenmilbe: Nacherntebehandlung mit Schwefel

Die verschiedenen Exakt- und Praxisversuche sowie die ersten Erfahrungen von Praxisanwendungen zeigen, dass mit einer Nacherntebehandlung mit 2% Schwefel (entspricht 32 kg/ha bei einem Baumvolumen von 10 000 m3/ha) eine erfolgreiche Bekämpfungsmöglichkeit gegen Birnpockenmilben vorliegt. Raubmilben werden nach unserer Erfahrung kaum beeinflusst, da sie zu diesem Zeitpunkt bereits weitgehend die Winterquartiere bezogen haben. Auch andere negative Auswirkungen konnten wir bis jetzt nicht feststellen. Unter Berücksichtigung aller bisher bekannten Fakten muss in Zukunft für die Birnpockenmilbenbekämpfung bevorzugt die neu bewilligte Herbstbehandlung mit Schwefel empfohlen werden

Materials for light-induced water splitting: In situ controlled surface preparation of GaPN epilayers grown lattice-matched on Si(100)

Energy storage is a key challenge in solar-driven renewable energy conversion. We promote a photochemical diode based on dilute nitride GaPN grown lattice-matched on Si(100), which could reach both high photovoltaic efficiencies and evolve hydrogen directly without external bias. Homoepitaxial GaP(100) surface preparation was shown to have a significant impact on the semiconductor-water interface formation. Here, we grow a thin, pseudomorphic GaP nucleation buffer on almost single-domain Si(100) prior to GaPN growth and compare the GaP_(0.98)N_(0.02)/Si(100) surface preparation to established P- and Ga-rich surfaces of GaP/Si(100). We apply reflection anisotropy spectroscopy to study the surface preparation of GaP_(0.98)N_(0.02) in situ in vapor phase epitaxy ambient and benchmark the signals to low energy electron diffraction, photoelectron spectroscopy, and x-ray diffraction. While the preparation of the Ga-rich surface is hardly influenced by the presence of the nitrogen precursor 1,1-dimethylhydrazine (UDMH), we find that stabilization with UDMH after growth hinders well-defined formation of the V-rich GaP_(0.98)N_(0.02)/Si(100) surface. Additional features in the reflection anisotropy spectra are suggested to be related to nitrogen incorporation in the GaP bulk

Optimized immobilization of ZnO:Co electrocatalysts realizes 5% efficiency in photoassisted splitting of water

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.Correction: There is an error in Fig. 8 of the manuscript. The correct Fig. 8 is shown in the additional file. To cite the Correction refer to DOI:10.1039/c6ta90030e.Organic solvents with varied electrophoretic mobility have been employed for deposition of nanocrystalline ZnO: Co particles onto fluorinated tin oxide supports. Evaluation of the electrochemical activity for the oxygen evolution reaction proves a clear solvent-dependence with highest activity upon deposition from acetonitrile and lowest activity upon deposition from ethanol. Analysis of the resulting layer thickness and density attributes the improved electrochemical activity of acetonitrile-prepared samples to larger film thicknesses with lower film densities, i.e. to films with higher porosity. The findings suggest that the ZnO: Co films represent an initially nanocrystalline system where the catalytic activity is predominantly confined to a thin surface region rather than to comprise the entire volume. Closer inspection of this surface region proves successive in operando transformation of the nanocrystalline to an amorphous phase during evolution of oxygen. Furthermore, less active but highly transparent ZnO: Co phases, prepared from ethanol-containing suspensions, can be successfully employed in a stacking configuration with a low-cost triple-junction solar cell. Thereby, a solar-to-hydrogen efficiency of 5.0% in splitting of water at pH 14 could be realized. In contrast, highly light-absorbing acetonitrile/acetone-prepared samples limit the efficiency to about 1%, demonstrating thus the decisive influence of the used organic solvent upon electrophoretic deposition. Stability investigations over several days finally prove that the modular architecture, applied here, represents an attractive approach for coupling of highly active electrocatalysts with efficient photovoltaic devices.BMBF, 03IS2071F, Light2Hydrogen - Energien für die ZukunftDFG, SPP 1613, Regenerativ erzeugte Brennstoffe durch lichtgetriebene Wasserspaltung: Aufklärung der Elementarprozesse und Umsetzungsperspektiven auf technologische Konzept

Water-induced modifications of GaP(100) and InP(100) surfaces studied by photoelectron spectroscopy and reflection anisotropy spectroscopy

In this work, we investigate the initial interaction of water and oxygen with different surface reconstructions of GaP(100) applying photoelectron spectroscopy, low-energy electron diffraction, and reflection anisotropy spectroscopy. Surfaces were prepared by metal-organic vapour phase epitaxy, transferred to ultra-high vacuum, and exposed to oxygen or water vapour at room temperature. The (2 4) reconstructed, Ga-rich surface is more sensitive and reactive to adsorption, bearing a less ordered surface reconstruction upon exposure and indicating a mixture of dissociative and molecular water adsorption. The p(2 2)=c(4 2) P-rich surface, on the other hand, is less reactive, but shows a new surface symmetry after water adsorption. Correlating findings of photoelectron spectroscopy with reflection anisotropy spectroscopy could pave the way towards optical in-situ monitoring of electrochemical surface modifications with reflection anisotropy spectroscopy

Business Rules: Die Wissensverarbeitung erreicht die Betriebswirtschaft ; Einsatzmöglichkeiten und Marktübersicht

--

The interface of GaP(100) and H2O studied by photoemission and reflection anisotropy spectroscopy

We study the initial interaction of adsorbed H2O with P-rich and Ga-rich GaP(100) surfaces. Atomically well defined surfaces are prepared by metal-organic vapour phase epitaxy and transferred contamination-free to ultra-high vacuum, where water is adsorbed at room temperature. Finally, the surfaces are annealed in vapour phase ambient. During all steps, the impact on the surface properties is monitored with in situ reflection anisotropy spectroscopy (RAS). Photoelectron spectroscopy and low-energy electron diffraction are applied for further in system studies. After exposure up to saturation of the RA spectra, the Ga-rich (2 × 4) surface reconstruction exhibits a sub-monolayer coverage in form of a mixture of molecularly and dissociatively adsorbed water. For the p(2 × 2)/c(4 × 2) P-rich surface reconstruction, a new c(2 × 2) superstructure forms upon adsorption and the uptake of adsorbate is significantly reduced when compared to the Ga-rich surface. Our findings show that microscopic surface reconstructions of GaP(100) greatly impact the mechanism of initial interface formation with water, which could benefit the design of e.g. photoelectrochemical water splitting devices

The interface of GaP(100) and H_2O studied by photoemission and reflection anisotropy spectroscopy

We study the initial interaction of adsorbed H_2O with P-rich and Ga-rich GaP(100) surfaces. Atomically well defined surfaces are prepared by metal-organic vapour phase epitaxy and transferred contamination-free to ultra-high vacuum, where water is adsorbed at room temperature. Finally, the surfaces are annealed in vapour phase ambient. During all steps, the impact on the surface properties is monitored with in situ reflection anisotropy spectroscopy (RAS). Photoelectron spectroscopy and low-energy electron diffraction are applied for further in system studies. After exposure up to saturation of the RA spectra, the Ga-rich (2 × 4) surface reconstruction exhibits a sub-monolayer coverage in form of a mixture of molecularly and dissociatively adsorbed water. For the p(2 × 2)/c(4 × 2) P-rich surface reconstruction, a new c(2 × 2) superstructure forms upon adsorption and the uptake of adsorbate is significantly reduced when compared to the Ga-rich surface. Our findings show that microscopic surface reconstructions of GaP(100) greatly impact the mechanism of initial interface formation with water, which could benefit the design of e.g. photoelectrochemical water splitting devices